solved: DomU P2V, no drive found

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

solved: DomU P2V, no drive found

Flako
2013/8/1 Alexandre Kouznetsov <[hidden email]>:

> Hello.
>
> El 01/08/13 15:31, Flako escribió:
>
>> Alexandre
>>      Should not put the puck as if sdxx or hdxx, but it sure is the 2nd
>> partition (this is how you create the partitions and is as seen from
>> qemu-nbd)
>>
>>      Believing the links (/dev/disk/by-uuid/) and mknod devices
>> accessing the disk via qemu-nbd (probe with hda2,hdb2,sda2,sdb2). But
>> then when you start the domU in the bash-like console do not appear.
>> :(
>>      Then I did the same from the bash-like domU console and try to
>> mount the disk, the mount command shows the error 'is not a valid
>> block device'
>>
>>         $ mount  -t reiserfs  /dev/sdb2 /aa
>>         mount: /dev/sdb2 is not a valid block device
>
> If you can get into that back-like domU console again, try this:
> ls -al /dev/disk/by-uuid
> ls -al /dev/disk/by-uuid/fb5c6b0b-3688-43cd-8b20-d8fa3a0ba993
>
>
>> xen_vbd locate the module in the domU (SLES11SP1) and the module does not
>> exist.
>> Looking in there dom0 (SLES11SP2) module, this in /
>> lib/modules/3.0.13-0.27-default/updates/blkfront/xen-vbd.ko (Package
>> xen-kmp-default-4.1.2_14_3.0.13_0.27-0.5.5.rpm)
>
> I did not understand if the file
> /lib/modules/3.0.13-0.27-default/updates/blkfront/xen-vbd.ko
> is present in your system or not. If not, reinstall package
> xen-kmp-default-4.1.2_14_3.0.13_0.27-0.5.5.rpm. Verify if the kernel you are
> running is indeed "3.0.13-0.27-default".
>
> It's also possible, that the module is present in the system but not in the
> initrd (check that). In that case, rebuid your initrd.
>
> This reference should tell you how to add modules and rebuild initrd.
> ftp://ftp-uxsup.csx.cam.ac.uk/pub/doc/suse/suse9.2/suselinux-adminguide_en/ch10.html
>
>
>>       I have already run out of ideas ..
>>       Any idea where to look and read?
>
> Did you tried using ioemu flag?
>
>
> --
> Alexandre Kouznetsov
>
>


Alexandre
     With your guidance to start correctamete achieved.
     Now-hvm domU starts :)
    Thank you very much.

     What was missing was to rebuild the initrd with the command:

               mkinitrd -vk /boot/vmlinux-2.6.32.12-0.7-default.gz -i
/boot/initrd-2.6.32.12-0.7-default-sda -M
/boot/System.map-2.6.32.12-0.7-default -d /dev/sda2

     edit  /boot/grub/menu.lst to use the new initrd and
root=/dev/hda2 . with this worked


     Though not clear to me why it was necessary to create it again,
in the INITRD_MODULES was defined xen-vbd module (INITRD_MODULES =
"xen-vbd piix ata_piix ata_generic processor fan ide_pci_generic
xen_vbd reiserfs edd")
      Either because you need to use the parameter '-d / dev/sda2'
(with /dev/hda2 does not work), being that just started using Linux
hda2.


     Answering your question, the option ioemu, if I'm using it since
I inidicaste, but makes no boote use the domU.
     By xen-vbd.ko module was in the domU and dom0 (I to get it confused me)

_______________________________________________
Xen-users mailing list
[hidden email]
http://lists.xen.org/xen-users
Reply | Threaded
Open this post in threaded view
|

ctrl + ] throws me out of telnet

Jaya Dhanesh
Hi,

I telnet to a system from where I use xm commands to create/manage VM. When I do a
ctrl+] to exit from xm console, it throws me out of the telnet session to the host. Is there a way
to make ctrl+] work on the xm console and not for telnet?

Thanks,
Dhanesh.


_______________________________________________
Xen-users mailing list
[hidden email]
http://lists.xen.org/xen-users
Reply | Threaded
Open this post in threaded view
|

Re: ctrl + ] throws me out of telnet

James Harper
> Hi,
>
> I telnet to a system from where I use xm commands to create/manage VM.
> When I do a
> ctrl+] to exit from xm console, it throws me out of the telnet session to the
> host. Is there a way
> to make ctrl+] work on the xm console and not for telnet?
>

telnet supports the -E option to turn off the escape character completely, or the -e option to change the escape character to something other than the default.

James

_______________________________________________
Xen-users mailing list
[hidden email]
http://lists.xen.org/xen-users
Reply | Threaded
Open this post in threaded view
|

Re: ctrl + ] throws me out of telnet

Jean-Paul Pozzi
In reply to this post by Jaya Dhanesh


----- Mail original -----
De: "Jaya Dhanesh" <[hidden email]>
À: [hidden email]
Envoyé: Vendredi 30 Août 2013 07:32:11
Objet: [Xen-users] ctrl + ] throws me out of telnet


Hi,

I telnet to a system from where I use xm commands to create/manage VM. When I do a
ctrl+] to exit from xm console, it throws me out of the telnet session to the host. Is there a way
to make ctrl+] work on the xm console and not for telnet?

Hello,

Prefer ssh to telnet, it is more secure ....

Regards

JP P



Thanks,
Dhanesh.

_______________________________________________
Xen-users mailing list
[hidden email]
http://lists.xen.org/xen-users

_______________________________________________
Xen-users mailing list
[hidden email]
http://lists.xen.org/xen-users